1. Check rattle and extreme intervals between raised floor panels prior to installation of MAXI F&R TILE(If rattling, contact with an installer for floor panels) 2. If there are special insturctions in layout, follow the design on instructions. 3. In order not to include small cut part in verge and doorway, after making inking line, spread fully anti-slippery material with brushed roller n accordance with layout line. Arrange dotted line of floor panels and MAXI F&R TILE not to be in the same line. 4. After painting anti-slippery material, dry it for 5 to 10 minutes. Begin to install MAXI F&R TILE, after the part of painted white Surface changed into transparent. 7. A best way to complete the circumference of walls is to use actual measurement by a straight ruler. MAXI F&R TILE could be used to be a straight ruler in itself like the installing method of PVC tile. when cutting it, make vertical with several hand cut swing. If cut tiltedly, coming off tile may occur. 6. In accordance with a fiducially line, facing the dotted line to the wall, check the directing arrow painted on the back of tile and install in order in the same direction Finally, install the circum-ference of pillars and walls. 5. In case of installing below 15˚C, please use a spacer as thick as a name card on the interval between tiles not to tighten tiles. That temperature is rising rapidly by floor heating in the winter results in coming off the tiles. 8. Construct the wiring such as up-outlet if needed. 9. If move or handle heavy objects, spread a protective mat on MAXI F&R TILE.