Basically, MAXI F&R TILE is manufactured more strongly in expansion and shrinkage than general vinyl tile Excellent dimensional stability and its heaviness by the thickness prevent tiles from coming off the floor. *Caution for installation. Install tiles on room temperature over 15˚C When installed below 15˚C, please use spacers as thick as a name card on the interval between tiles. If fixed with adhesive, homogeneous vinyl floor tile tends not to come off the floor. In a spread construction method, coming off the floor occurs simply. However, MAXI F&R TILE gets an advantage over others.  The method of test The outline of test The method of test Test for a condition of coming off the tile by temperature rising. Lay 2 pieces of tile side by side at constant temperature room maintaining 5˚C and fix on tip of the tile with quick-drying glue. After that, by changing 10˚C to 45˚C, check condition of the tile. Coming off the floor is caused by expansion of the floor. Though expansion is caused by temperature and moisture, the interval of dotted line is still critical factor. Compared with another homogeneous vinyl tile, MAXI F&R TILE has the property not to expand with ease. When installed with too much closed the line of dotted, if there is wide difference in temperature, Coming off the floor may occur. Depending on personal installation styles, keep tiles the room temperature over 15˚C when installing. In case of inevitable installing below 15˚C, please use spacers as thick as a name card on the interval between tiles.